The crucial function of cell phone booster, the broadcast of amplified cellular signals, is performed by its indoor antenna. Therefore, selecting the appropriate type of indoor antenna for cell phone booster is important for failsafe signal boosting operation.
Depending on the coverage area required, you may install one or more indoor antennas inside homes, buildings and vehicles.
How Many Indoor Antennas Should You Purchase?
Installing more indoor antennas can increase the coverage area and indoor signal strengths. Cellular signals find it easier to travel inside coaxial cable than through walls, doors, and air. To ensure consistent coverage, you have to distribute the signals through coaxial cables throughout the building.
There is no denying that an increased number of indoor antennas makes positive contributions to the coverage area but deciding the antenna number without analyzing the required coverage area is not the right way to do it. At some point, many indoor antennas might become unaffordable.
One indoor antenna per 1000 feet coverage is the general recommendation that you can follow while installing signal booster units in your buildings. The area of the space that has to be covered, the gain of the amplifier and number of possible obstructions in the coverage area influence the decision of antenna numbers.
Which Type Of Indoor Antenna Should You Select?
Two major types of indoor antennas are the dome antenna and panel antenna, which operate differently in the installed location. Let us get into the details of the antenna types.
Dome antennas distribute boosted signals to all directions equally. These antennas are ideal for your living space if:
- If it is not narrow; take for example a hallway.
- You can access the space behind the ceiling to install the dome antenna properly on the ceiling.
If you want to cover a wide space like a large room or a floor of a building, installing a dome antenna is the right choice.
Panel antennas are directional in nature, meaning that they broadcast signals to a particular direction. Panel antennas are ideal if:
- A long and thin area has to be covered.
- The space behind the ceiling is inaccessible.
Panel antennas are usually mounted on walls and the cable end comes out of its bottom, eliminating the need to pierce a hole on the portion of the wall behind the antenna. To cover multiple floors in a building, you can choose panel indoor antennas.
Keep in mind that the coordinated functioning of cellular signal booster components is essential for ensuring the best cell reception.